Files (2)

motocase_v4.stl

STL

38.9 KB

sloupek.stl

STL

47.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
motocase_v4.stl	Printable file	38.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent the holder from shifting during use.
sloupek.stl	Printable file	47.4 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent the holder from shifting during use.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Honda phone holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Printed form PETG, mounted with two scews 6x30mm. On the right side is hole for charger. Phone is Samsung S7. Holder is designed to keep phone with transparent plastic case.