Files (2)

HONDA_BELT_FINAL.stl

STL

256.7 KB

HONDA_FINAL.stl

STL

156.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 100%	100% solid	Recommendation
HONDA_BELT_FINAL.stl	Printable file	256.7 KB STL	Slice file	Slice file	Slice file	Rotate the smaller tool to print with both thin prongs on the bed for stability
HONDA_FINAL.stl	Printable file	156.3 KB STL	Slice file	Slice file	Slice file	Rotate the smaller tool to print with both thin prongs on the bed for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Honda seatbelt tool

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This a set of Honda seatbelt tools for buckle removal number in order, 1 latches buckle 2 holds in place and 3 removes button. needs supports small tool 100 percent infill large tool 20 percent Recommend rotating smaller tool so both thin prongs sit on bed.