Hood support clip for Nissan Qashqai - image

Files (1)

ClipVarillaCapo.STL

STL

961.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
ClipVarillaCapo.STL	Cover / cap	961.8 KB STL	Slice file	Slice file	Slice file	Use ABS / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Hood support clip for Nissan Qashqai

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The original clip broke and the rod got loose pressing the washer tube. Designing and printing a new one was faster and cheaper than going to the shop. This part should withstand high temperatures from the motor and the hood, so it's advised to print it in ABS.