Files (1)

Hood_Support_Clip_v5.stl

STL

558.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hood_Support_Clip_v5.stl	Clip	558.0 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Nissan Leaf Hood Support Clip

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a hood support clip that the end of the hood support can clip into so it doesn't rattle. There is one in the center of the hood for the middle of the hood support. This one is for the end. It snaps into a hole that already exists in the inside of the hood, so you're not doing any damage to the car. It is also easily removed, just pinch it at the base and lift it out.