Files (1)

-v1.1.stl

STL

51.2 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

119g

Based on 25% main infill across listed model files

Material cost

$2.85

Filament only at roughly $24/kg PETG / ASA

Print time

3.4h–5.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
-v1.1.stl	Primary model	51.2 MB STL	109g $2.62	119g $2.85	260g $6.24	Ensure proper fitment by checking the dimensions and creator's notes

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hub Cap Land Rover Discovery 3

0 downloads93 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Крышка ступицы от третьего дискаря. Catalog note: Hub Cap Land Rover Discovery 3 is a 3D-printable car-part listing indexed for classified fitment Land Rover Discovery 3. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.