Files (1)

Console_Insert.stl

STL

196.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Console_Insert.stl	Primary model	196.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Hyundai Tucson Dash insert

0 downloads61 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This fits my 2008 Hyundai Tucson. I created this as a base for creating inserts with various uses, like phone holder brackets, aux input for the audio system etc. This one goes in the bottom right hand corner of the 4 holes in my dash. (My car is right hand drive.) If you change the lcy value to a positive, and add the width of the rectangle, it should work for the bottom right hand corner.(May require some more tweaking) Even easier, just mirror it:) The photo shows a quick test print(low res) I did to check the dimensions and fit. The triangles.scad file can be found here: https://github.com/tkoopman/Delta-Diamond/blob/master/OpenSCAD/Triangles.scad