iluminated gearshift knob for Renault Clio III (Mark II) - image

Files (6)

Basis.stl

STL

120.0 KB

Cover_Links.stl

STL

33.7 KB

Cover_Rechts.stl

STL

33.7 KB

Cover_Top.stl

STL

65.5 KB

Mark_II_.stl

STL

319.0 KB

Transparent.stl

STL

67.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Basis.stl	Printable file	120.0 KB STL	Slice file	Slice file	Slice file	Use a heated bed if available to improve adhesion
Cover_Links.stl	Cover / cap	33.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cover_Rechts.stl	Cover / cap	33.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cover_Top.stl	Cover / cap	65.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mark_II_.stl	Printable file	319.0 KB STL	Slice file	Slice file	Slice file	Use a heated bed if available to improve adhesion
Transparent.stl	Printable file	67.4 KB STL	Slice file	Slice file	Slice file	Use a heated bed if available to improve adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

iluminated gearshift knob for Renault Clio III (Mark II)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Beleuchteter Schaltknauf für Renault Clio III. Wenn man die Basis aus PLA druckt, kann es passieren, dass sie sich verzieht und sich der Knauf drehen lässt. Mark III ist eine verbesserte Version die normal schon fester sitzen soll. Die einzelnen Bauteile habe ich mit Epoxidharz überzogen und miteinander verklebt. Beleuchtet wird der Schaltknauf durch vier LEDs. Diese lassen sich individuell durch einen Arduino ansteuern. Ein Programm dafür findest du unten.