Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| iPadCarMount-Left.stl | Choose left variant | 126.9 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| iPadCarMount-Right.stl | Choose right variant | 126.9 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
iPad Pro (9.7") car dash mounts - suit Toyota Landcruiser Prado 120
Shared by
3DPrintedCarPartDescription
A set of two (left and right) mounting corners to suit an iPad Pro (9.7") in a smart-case. The rear surface curvature was modelled to suit a Toyota Landcruiser Prado 120. Attached using 3M VHB double-sided adhesive tape - clean bonded surfaces well before applying (I used isopropyl alcohol).
Compatible Cars
Originally published on thingiverse.com by Neville Blyth (Nargun) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
