iPhone 6/6s holder for VW Passat B6 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone 6/6s holder for VW Passat B6

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I made this thing to fit into coin box of my VW Passat B6 with phone charging cable glued into bottom of holder. It stands straught to drivers face, folds nicely so that coin box can be closed. This fits for an iPhone 6s (also iPhone 6) with 11mm thick case. Might fit also other phones. I used this cable, but removed aluminium piece, cut a bit of rubber and removed 5cm of fabric, so that cable is more flexible behind the hinge: https://www.amazon.de/gp/product/B07593RGKV/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 Plug dimensions: 5mm x 10mm Required M2 screws (2x10mm, 2x15mm), also 2mm nails will do the job.