Files (2)

limiter.stl

STL

86.0 KB

support.stl

STL

266.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
limiter.stl	Printable file	86.0 KB STL	Slice file	Slice file	Slice file	Print the 'Support' piece vertically as recommended by the designer
support.stl	Printable file	266.4 KB STL	Slice file	Slice file	Slice file	Print the 'Support' piece vertically as recommended by the designer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

IPhone stand for Audi

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Robust and fitted design. Don't worry about the charging cable, if you are using travel navigator you can invert the phone. It closes and opens perfectly. You need to apply some glue to the "limiter" part. The assembly of this piece is better with the cup holder disassembled. It is designed for Audi (95-02) models, it could be used for other models of the VAG group with unique cup holder. Better print vertically the piece "Support".