Jeep Cherokee Lower Dash Switch Panel - image

Files (3)

switch_round2.stl

STL

248.3 KB

xj_3switch_rect.stl

STL

229.0 KB

xj_switch_rect.stl

STL

228.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
switch_round2.stl	Printable file	248.3 KB STL	Slice file	Slice file	Slice file	Mounts in front of the shifter using 3M double-sided tape
xj_3switch_rect.stl	Printable file	229.0 KB STL	Slice file	Slice file	Slice file	Mounts in front of the shifter using 3M double-sided tape
xj_switch_rect.stl	Printable file	228.2 KB STL	Slice file	Slice file	Slice file	Mounts in front of the shifter using 3M double-sided tape

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Jeep Cherokee Lower Dash Switch Panel

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this for my 2000 Cherokee. It mounts right in front of the shifter. I used 3M double sided tape on the underside of the panel. 6/2/16 I added a three switch version. 11/6/17 Added a round rocker switch version.