Files (1)

dashboard.stl

STL

4.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dashboard.stl	Primary model	4.1 MB STL	Slice file	Slice file	Slice file	Slice the model along thicker areas like the ribs for easier printing and assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Jeep Cherokee (XJ) Dash

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replica of the dash box from an 89 Jeep Cherokee, it will match up with the wiring sheet and plug correctly. The front panel is for my EV Conversion, so you'll lively want your own setup if you use that part as well. If you want to modify the designs, openSCAD file is available here: https://github.com/smmccabe/xjdash Printing ----------------- You'll likely have to slice this up to fit in most printers, slicing along thicker areas like the ribs works best as then it is easier to glue or weld back together. You can also install it split on 2 sections, I tested and that seemed to work fine.