Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Jeep_Boot_Clip.stl | Clip | 36.0 KB STL | 9g $0.22 | 10g $0.24 | 22g $0.54 | Ensure proper adhesion to the print bed for a strong bond. |
| Jeep_Boot_Clip_Short.stl | Clip | 36.0 KB STL | 9g $0.22 | 10g $0.24 | 22g $0.54 | Ensure proper adhesion to the print bed for a strong bond. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Cherokee XJ Boot/Tailgate clip fix
Shared by
3DPrintedCarPartDescription
My boot cover had all but 2 clip holders snapped away from the cover itself.and could not hold itself on. These covers glue over the originals to take hold of the original plastic trim clips. I am useless at taking pictures to demonstrate how these go but it should be self explanatory. The cover has 9 of the standard covers and 2 of the small covers.
Compatible Cars
Originally published on thingiverse.com by Anthony Proffitt (boxburn) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
