Files (1)

Jeep_Tailgate_Plug.stl

STL

32.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jeep_Tailgate_Plug.stl	Primary model	32.7 KB STL	Slice file	Slice file	Slice file	Ensure a tight fit by adjusting the scale in the slicer if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Jeep Wrangler Tailgate Plug

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

After my dealership swapped out the spare carrier on my new 2016 JK, I noted a small oval shaped hole that was begging to get water in it. Water = rust, so I decided to look for a plug. Not finding one I liked, I decided to make one really quick before the storms came. The plus was a bit tight once I printed it, so I downscaled it just a tad before publishing it here. If it's still too tight (or too loose now), please let me know and I will correct, I plan to make another using NinjaFlex so it will be easy to remove in the event that I need to.