Jeep Comanche Interior Screw Caps - image

Files (2)

MJ_Cap.STL

STL

254.0 KB

MJ_Cap_Large.STL

STL

254.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MJ_Cap.STL	Cover / cap	254.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
MJ_Cap_Large.STL	Cover / cap	254.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Jeep Comanche Interior Screw Caps

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Haven't been able to find the larger cap above the dome lights for my Comanche in the junk yards, so I designed one based off the smaller caps that cover the other screws. Takes about 5 minutes each to print.