Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| TJWranglerJeepVisorClip.stl | Clip | 239.3 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| TJWranglerJeepVisorClipLatch.stl | Clip | 23.9 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| TJWranglerJeepVisorClipV2.stl | Clip | 263.1 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep TJ Wrangler Sunvisor Clip (latch-type)
Shared by
3DPrintedCarPartDescription
My old TJ sunvisor clips weren't holding the visor anymore, so I designed these with latches: push up the latch to remove the sunvisor. Push down the latch to lock the sunvisor in place.
Compatible Cars
Originally published on thingiverse.com by Thomas Kline (TommyBBQ) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
