Files (3)

Body1.stl

STL

209.5 KB

Body2.stl

STL

71.2 KB

Body3.stl

STL

78.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Body1.stl	Printable file	209.5 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion, possibly with a brim as mentioned
Body2.stl	Printable file	71.2 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion, possibly with a brim as mentioned
Body3.stl	Printable file	78.7 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion, possibly with a brim as mentioned

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

jeep wrangler sun glass storage

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

with limit jeep storage decided to sacrifice the mirror on the visor for sunglass storage case simple slides on and off so you can remove if need be the handle just gets drilled to a preferred location on the case lid material: PLA Supports: on the main frame yes, the other parts no. Bed adhesion: placed a brim on the case lid.