Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| jeep-zj-battery-holder-bracket.stl | Mount / bracket | 379.2 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal support generation |
| jeep-zj-battery-holder-clip.stl | Clip | 349.3 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal support generation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Grand Cherokee (93-98 ZJ) battery holder
Shared by
3DPrintedCarPartDescription
Battery hold down bracket and clip for a Jeep Grand Cherokee from 93 to 98, but might fit others. Clip replaces the original metal clips that might be rusted or cross threaded. Requires a 8 mm x 1.25, 9/16 OD nut. It fits a bit tight so filing/sanding it a bit might be needed. Supports only for the bracket.
Compatible Cars
Originally published on thingiverse.com by Esteban Petrovich (epetrovic) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
