Jeep Grand Cherokee WJ / WG battery holder support - image

Files (1)

battery_holder.stl

STL

238.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
battery_holder.stl	Mount / bracket	238.7 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports, considering the flat face on the bottom.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Jeep Grand Cherokee WJ / WG battery holder support

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Battery holder or battery support for 1999 - 2004 Jeep Grand Cherokee WJ/WG. Arrows shows on which side of the holder battery should be. I've supported only tle flat face on the bottom of the model.