Files (1)

jeep_handle_inserts.stl

STL

438.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jeep_handle_inserts.stl	Primary model	438.6 KB STL	Slice file	Slice file	Slice file	Use double stick tape for mounting

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

jeep handle inserts

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eVNdT31qL8Y These will fit inside of door handles on a Jeep JK. All you need is some double stick tape and you just saved yourself $60.00 you will need to print out these files 2 times if you have a 4 door, and then one more for the back door.