Jeep Wrangler Soft Door Window Latch - image

Files (1)

Window_Latch.stl

STL

62.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Window_Latch.stl	Primary model	62.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Jeep Wrangler Soft Door Window Latch

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I own a 1997, 1999, & 2001 Jeep Wranglers, so I have a lot of opportunities to replace broken parts. The OEM window latches have a spring built into them which broke over time, so rather than buying a whole new set of windows I decided to make my own latch! Dimensions taken directly from OEM Jeep Wrangler window latches, using a set of vernier calipers and some good old fashion best guesses. I've replaced all 4 in my Jeep and they work SOOO much better now, I no longer have to keep closing my windows as they slide open whenever I drive over bumps.