Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tail-light-L.stl | Printable file | 1.4 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| Tail-light-R.stl | Printable file | 1.4 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Wrangler auxiliary rear light bracket
Shared by
3DPrintedCarPartDescription
I have a 2015 JK and found the reverse lights to be very poor for ligthing up the area behind you at night. After some searching I found some nice ideas on how to install additional reverse lights and decided to make my own. I bought a set of these MicTuning 4" 18W LED bars on Amazon and designed a bracket in Sketchup. I also replaced the original reverse light bulbs with LED versions, to reduce the total current when adding the light bars. I think I will have sufficient light now when reversing.;) https://www.amazon.com/dp/B00KLC82B6/ref=cm_sw_em_r_mt_dp_U_qefYDbFRA7QEV The Sketchup file is also attached.
Compatible Cars
Originally published on thingiverse.com by Johan De Vries (jdev99) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
