Jeep YJ Courtesy Light Switch Clip - image

Files (1)

YJ_SWITCH_CLIP.stl

STL

8.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

Based on 25% main infill across listed model files

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
YJ_SWITCH_CLIP.stl	Clip	8.1 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Jeep YJ Courtesy Light Switch Clip

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This clip will hold a Jeep YJ door switch open so the interior lights will remain off when the doors are removed. This was designed to work with OMIX part number 17237.17 but I believe it may work with others. A note on these door switches...it is well known that these switches are weak and break easily. I found that putting some JB Weld into and around the joint at the back end strengthens the joint. Also, putting some dielectric grease on the contacts improves the function of the switch.

Compatible Cars

Jeep Wrangler

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Erich P (5dot5six) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.