Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

KIA Ceed USB charger housing

0 downloads127 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement part for the USB charger housing in the KIA Ceed. The electricity symbol is printed with dual extrusion. There is also a version without the symbol for single extrusion printers. A brim is recommended. A lot of support is needed, which is a bit tricky to remove. But it works. If it is printed with PLA, the case can be installed without problems, but it will break when dismantled. However, dismantling is not the normal use case... With ABS it is more stable and removal is also possible. The housing is somewhat modified. It is screwed into the console to simplify replacement. The original part can only be removed with a lot of force. The replacement, on the other hand, can be removed from the car very easily.