Kia Niro Headlight dust cover (with more space for LED) - image

Files (1)

dop_koplamp_kia_3.stl

STL

23.0 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

119g

Based on 25% main infill across listed model files

Material cost

$2.85

Filament only at roughly $24/kg PETG / ASA

Print time

3.4h–5.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dop_koplamp_kia_3.stl	Primary model	23.0 MB STL	109g $2.62	119g $2.85	260g $6.24	Ensure proper orientation in the slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Kia Niro Headlight dust cover (with more space for LED)

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this replacement part to install LED lights which require more room. In the rsdoc file there are 2 version, 1 big, one small. The big one did not fit on the left zide.