Files (1)

kia-rio-boot-switch-replacement.stl

STL

470.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
kia-rio-boot-switch-replacement.stl	Primary model	470.5 KB STL	Slice file	Slice file	Slice file	Ensure thin edges are printed with sufficient flexibility to allow for button press functionality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Kia Rio Boot release switch cover

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My Kia Rio has an issue where by the boot release button (which is rubber) has now perished leaving the micro switch exposed to the elements. This Thing is a quick and easy print to allow the boot release to work whilst protecting the microswitch. The edge of the material is thin so that its a bit flexible. The replacement button can be glued in with Rubber glue, (along the thin edges). This will allow the button to be pressed and keep the electronics safe from the elements. This hasnt been tested long, and only during cold weather. Being PLA it may not stand up to well in hot summers.