Kia Rio Fahren Krieges Led Adapter - image

Files (1)

Led-Adapter-Kia-v2.stl

STL

53.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Led-Adapter-Kia-v2.stl	Primary model	53.4 KB STL	Slice file	Slice file	Slice file	Ensure the adapter is printed with a high enough infill to support the weight and heat of the LEDs.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Kia Rio Fahren Krieges Led Adapter

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this adapter to fit Fahren Krieges Leds on Kia Rio 2013. I printed the adapter using PLA and works without any problem with led temperature (60-70 celsius degree when is power on).