Files (3)

Towbar_bottom_Plug.stl

STL

221.1 KB

Towbar_bottom_Plug_large_half.stl

STL

202.5 KB

Towbar_bottom_Plug_small_half.stl

STL

118.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Towbar_bottom_Plug.stl	Printable file	221.1 KB STL	Slice file	Slice file	Slice file	Print with the clips' holding part oriented to minimize support material
Towbar_bottom_Plug_large_half.stl	Printable file	202.5 KB STL	Slice file	Slice file	Slice file	Print with the clips' holding part oriented to minimize support material
Towbar_bottom_Plug_small_half.stl	Printable file	118.2 KB STL	Slice file	Slice file	Slice file	Print with the clips' holding part oriented to minimize support material

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Kia Towbar buttom plug

0 downloads145 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this plug for my detachable towbar on my Kia Rio. First i created a whole one, but the "clips" keept snapping due to the print orientation, I could change the orientation, and then use lots of support. But instead I cut the design so I could change the print orientation for the part that holds the "clips", this way I only need 4 small custom supports for the pins on the second half. I've attached the Inventor ipt files, so any one could change what they want's to. Also the uncut plug is included, that's the "towbar_bottom_plug".