Files (2)

Nipple.stl

STL

124.9 KB

Shield.stl

STL

127.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Nipple.stl	Printable file	124.9 KB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer
Shield.stl	Printable file	127.3 KB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Lada Niva jack add-on

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The original jack on the Lada Niva has a design feature, if you don't pay attention to what you are doing while lifting the car you might damage your paintwork. When rotating the handle the other end of the axel on the jack can scuff your paint. This add-on hides the rorating part and the jack won't do as much damage as before. This thing consists of two pieces, the shield that snaps on the jack and the nipple in the center that hides the end of the rotating axel. The pieces snaps on, no tools or additional hardware required. Print in PLA / PET-g / ABS, does not matter. You can print whitout supports if your setup can negotiate overhangs.