Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| airconcover_v11.stl | Cover / cap | 410.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Land Cruiser 100 Series Air Con Filter Door
Shared by
3DPrintedCarPartDescription
Some Land Cruisers didnt come with the air conditioner filters, but the cover can be cut to fit them. This is a design of the factory door cover that fits. This has been designed a little bigger than the factory cover as I cut my hole slightly bigger (ie; i cut to the line on the factory molding, where as the original version stops about 1mm short). If you are doing this mod, you will know what I mean. The tabs will likely break off and are largely useless. If there is interest in this design Ill add tabs that can be printed horizontally and inserted and glued in. Printing ion ABS or similar might make the current tabs better Printing: Material: PLA InFill: 45% Supports: Tree.
Compatible Cars
Originally published on thingiverse.com by Matt Shumack (Marodian) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
