Land Rover Defender 110 TDI Transfer Handle Insert - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Land Rover Defender 110 TDI Transfer Handle Insert

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This model is an insert replacement for Land Rover Defender 110 TDI transfer handle. It may fit other models. The file was made using dimensions taken from the vehicle, V1 fits but do not holds very well. V2 was made so the insert will open some more once in place. If needed, updated version will be upload once used for a while. Modeling was made using NX UG. Source file could not be uploaded, if you may need the source file please feel free to contact me and I will send it to you. V2 Dimensions: OD: 19.7mm ID: 10-9.2mm Hight: 20mm V1 Dimensions: OD: 19.5mm ID: 9.8mm Hight: 20mm.