Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| push pins 3.6mm.stl | Primary model | 17.8 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Land Rover Discovery 1 Switch Panel Cover
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
supports unlikely
Infill
20-30% infill for durability
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
A cover panel for the window and heated-seat switches in a Land Rover Discovery 1. The original part has prongs that press into the supporting plate and these are usually easily broken. I've designed my panel to print without support and have an alternative way to fix in place. I've created 4 counter-sunk holes in my design that align with the original pins. These can accept M4x12 screws, but you may find the plastic insert of the back panel rotate with the screw, making it hard to fix in place. You can either glue those plastic collars in the holes to stop them spinning, or press my provided pins in place instead. These should print to provide a firm connection. You may need to adjust horizontal expansion if your material needs it. I've added some 3.4mm diameter pins today that fit my car better, but you may still need to experiment. My discovery 1 has switches for windows and heated seats, so the design matches. Please do check before printing. It's possible this also fits in Discovery 2 but I have not checked.
Compatible Cars
Originally published on printables.com by Pugwash · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Land Rover Discovery 2 AC drain plug mod
Land Rover Discovery 1 Blind Button
Land Rover Discovery Rear Seat Button (200tdi)
Towbar plug Land Rover Discovery 3
Land Rover Discovery Rear Work Light Mount
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
