Files (2)

LR_gear_knob.stl

STL

1.7 MB

LR_gear_knob_Logo.stl

STL

1.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
LR_gear_knob.stl	Printable file	1.7 MB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion
LR_gear_knob_Logo.stl	Printable file	1.8 MB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Land Rover gear knob

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Just a new gear knob, it fits the Slickshift from Syncrogearboxes for the Series. You just need to fine cut the bottom with a little knife and press it on. I added one with the original Land Rover logo, on a request.