Lotus Elise/Exige 2" Gauge Vent Mount Pod - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Lotus Elise/Exige 2" Gauge Vent Mount Pod

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A 2" Gauge Pod designed to replace the Lotus Elise/Exige and Alfa C4 air vent. Simply pop out the stock air vent and snap this gauge pod in. This has been designed to work with a Speco 2" gauge but no doubt it could be made to work with others with minimal changes. There are 2 versions. Straight, designed for later model S2 and S3 Lotus with the air vents higher up and inline of sight with the drive. Angled (7º upwards) to suit the earlier Lotus Elise's (2000 - 2003 ish) which have the vents lower in the dash and require the gauge to be tilted upwards to improve visibility. Can be fitted to the central and side vents.