Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Elise_phone_mount_door_Naztech_RHD.stl | Mount / bracket | 2.7 MB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to prevent the holder from detaching during use |
| Elise_phone_mount_door_round_RHD_v2.stl | Mount / bracket | 2.2 MB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to prevent the holder from detaching during use |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Lotus Elise, Exige door mounted phone holder
Shared by
3DPrintedCarPartDescription
The Lotus Elise/Exige platform has very limited space for loose items in the car. I have designed this holder for a magnetic phone base to hold the phone in a visible position without any modifications needed to the vehicle. There are two files, one for the Naztech magnet and one for a generic round magnet. This design is for RHD. For LHD you will need to mirror it in your slicer. Print was sanded and then covered in 3 coats of two part epoxy. Sanded agin, primed, painted in matching colour and then clear coated. There is a hole in the back to glue in a 5mm bolt to add rigidity and strength to the holder. Double side tape to the door.
Compatible Cars
Originally published on thingiverse.com by Roger Pereira (RogerTDogg) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
