Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Steering_wheel_logo_base_3_v5.stl | Primary model | 53.1 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry surface for printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Lotus Elise/Exige steering wheel badge emblem base
Shared by
3DPrintedCarPartDescription
As these cars get older, the finish on both the airbag cover and on the steering wheel center emblem start to fall apart. It's easy enough to refinish the airbag with plastidip as many have done, but the emblem is more difficult as it is semi-permanently mounted into the airbag with metal tabs. If you need to remove those, it is difficult to install (or even to find) a new one. As a solution, I purchased a stick-on emblem (very nice, from here), and made this small piece to mount it to the wheel and provide a flat but secure surface. I attached it to the steering wheel with Shoe Goo -- a nice rubbery adhesive. All together, the new wheel looks great!
Compatible Cars
Originally published on thingiverse.com by Will Meyer (fpvga) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
