Files (2)

Lotus_Logo_2019.stl

STL

198.3 KB

Lotus_Logo_2019_Thinner.stl

STL

199.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Lotus_Logo_2019.stl	Printable file	198.3 KB STL	Slice file	Slice file	Slice file	Use a single-extruder printer with a print-pause for multi-color effect if desired
Lotus_Logo_2019_Thinner.stl	Printable file	199.9 KB STL	Slice file	Slice file	Slice file	Use a single-extruder printer with a print-pause for multi-color effect if desired

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Lotus Logo Badge (2019+)

0 downloads20 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple design of the new Lotus logo that the manufacturer began using in 2019. There are 2 versions: Normal and "flatter". I prefer the flatter version for visibility. Either design can be printed with a single-extruder printer if you program a print-pause at the correct layer.