Lucid_Wedge.stl

STL

1.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Lucid_Wedge.stl	Primary model	1.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Lucid Air Wireless Charger Wedge

0 downloads55 views0 likes

Shared by

Verified

Description

The Lucid Air electric car has a built in wireless phone charger that has a few drawbacks. An odd angle, slow charging, and a clumsy clamp system. This is a simple add on that fixes those issues. Once you've printed it, you insert it in the clamp and then affix a Magsafe compatible puck-style charger to the angled surface with double-sided tape at the height that best suits your particular phone model. Then plug it into the usb-c port that is inside your center console. It's much easier to use and charging should be faster. here's a link to the charger that I used: https://www.amazon.com/THREEKEY-Magnetic-Wireless-Charging-Compatible/dp/B08NX9PC72/ref=sr_1_1?crid=1N1BVFXV9PDYH&keywords=threekey%2Bmagnetic%2Bwireless%2Bcharger%2C%2B15w%2Bfast%2Bcharging&qid=1672358417&sprefix=threekey%2Caps%2C172&sr=8-1&th=1