Files (1)

VW-LugCap-17mm.stl

STL

31.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.24

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW-LugCap-17mm.stl	Cover / cap	31.9 KB STL	9g $0.22	10g $0.24	22g $0.52	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Lug Cap (Volkswagen) - 17mm

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I created this Lug Cap for my 2017, Volkswagen Passat, winter tires. I didn't want to use the originals, since they can be removed pretty easily with the winter tires. The lug cap should fit 17mm lugs snuggly. Post-Print processing is required, refer to read-me file. To remove, you may want to use Tongue-and-groove pliers as they are tight upon first intallation.