Oil Cap Socket for 74mm for VW, BMW vehicles - image

Files (1)

oil_cap_wrench.stl

STL

81.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
oil_cap_wrench.stl	Cover / cap	81.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Oil Cap Socket for 74mm for VW, BMW vehicles

0 downloads116 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an Oil Cap Socket for VW Vehicles. For example: VW Golf 4, Passat 3B,3BG (B5, B5.5) and many others with a oil filter housing cap with a diameter of 74mm. It is also compatible with some BMW vehicles like the BMW X1 E84. You will need a 1/2inch wrench to fit the socket. Print like it´s on the picture.