Volkswagen MK4 Battery Hold Down for Golf / Jetta - image

Files (1)

Mk4_Battery_Hold_Down_v7.stl

STL

208.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Mk4_Battery_Hold_Down_v7.stl	Primary model	208.1 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment with metric hardware and the original metal top clamp

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volkswagen MK4 Battery Hold Down for Golf / Jetta

0 downloads115 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

*Working on cars can be dangerous. Use at your own risk* I've used this part to hold down the battery in my MK4 Golf TDI. Purchased the car with the battery bungie corded down and found there was a metal plate under the battery tray with a captive bolt that had rusted and would no longer tighten. I used this print to replace it with some metric hardware and the original metal top clamp (PN 1J0803219). I've run this setup for 2 years in cold climates and decided to post after not seeing wear in the part on a recent battery change.