Halter_2_3D_Druck_Mutter_1.stl

STL

32.1 KB

Halter_2_3D_Druck_Teil_1.stl

STL

223.2 KB

Halter_2_3D_Druck_Teil_2.stl

STL

226.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Halter_2_3D_Druck_Mutter_1.stl	Printable file	32.1 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Halter_2_3D_Druck_Teil_1.stl	Printable file	223.2 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Halter_2_3D_Druck_Teil_2.stl	Printable file	226.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Golf 8 RDKS retrofit mount

0 downloads95 views0 likes

Shared by

Verified

Description

Hello everyone, here are the brackets for the TPMS control unit on a Golf 8 which can be retrofitted. Here you will find a video about the function in the car. https://youtu.be/yIs8LsETabI Instructions (in German) can be downloaded here: https://drive.google.com/file/d/1DpJ_xrEczTPKrVsqrkWgNaY7Tsk2JYeo/view