Magnetic Center Vent Dash Mount for 2018 Honda Accord - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Magnetic Center Vent Dash Mount for 2018 Honda Accord

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I originally ordered the ProClip Center Dash Mount for my 2018 Honda Accord Sport but found it bulky. I also had a broken magnetic phone mount from a separate project. I traced the profile of the ProClip on paper and then scanned it using my printer. I took the scan and traced it in Fusion 360 and added all the details. The red clip is an earlier iteration that doesn't have the hole for the screw. The black clip is the one that's in the file. *I highly recommend printing it with ABS.* PLA is too brittle and will crack when mounting it for the first time or will warp from the heat of the car. If you want to protect the vent from scratches, you can use 3M VHB 5952