Files (2)

Matt1.stl

STL

517.0 KB

Matt2.stl

STL

511.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Matt1.stl	Printable file	517.0 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to avoid warping.
Matt2.stl	Printable file	511.7 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Mat-Lock

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This was designed to replace a lost carpet fastener in a 2017 Chevrolet Volt. Since I made the carpet part, I decided to make the other part that screws into the cars carpet (Matt2.stl). This way you can add this system to any car, you need to trim a hole in the mat so the center of the mat lock can fit through and screw into the other part, this is the file Matt1.stl.