Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mazda_2017_Armrest_Latch_Mod_v14.stl | Primary model | 213.0 KB STL | 16g $0.37 | 17g $0.41 | 37g $0.89 | Ensure a brim or raft is used if necessary for adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda CX5 Armrest latch mod
Description
The armrest latch is flimsy and looks like it will keep breaking unless design is changed. I made an adaptor that is more robust and should not break. Print with support touch plate. I used epoxy to attach it to the original latch. This is nothing fancy but a quick fix. I ground off the old left over material on the latch to slide this one over. You can get new one from dealers. Here is video talking about the problem. https://www.youtube.com/watch?v=MxinjN7_mhc
Compatible Cars
Originally published on thingiverse.com by addi khan (addicis) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
