Mazda CX5 Phone Magnetic Mount platform - image

Files (1)

with_air_vents_v4.stl

STL

219.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
with_air_vents_v4.stl	Primary model	219.5 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the platform is oriented for optimal airflow and accessibility.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Mazda CX5 Phone Magnetic Mount platform

0 downloads224 views0 likes

Shared by

Michael Chen

Verified

Description

Remixed specifically for my 2018 Mazda CX5, but should fit any CX5 between 2017-2024? at least according to the original product this is loosely based off of here. I already had a nice phone mount, but the base was just a little too big to mount anywhere nicely, so I took inspo and remixed a bit for this. Thinner profile and widened/chamfered the air vent slots to make them more accessible, original was hard to scroll it from being too deep Flat platform to stick an adhesive mounted phone mount on Also use to hang my glasses on (my sunglasses are already in the compartment).