Mazda Miata/MX-5 and Eunos Roadster Battery Fuse Support - image

Files (1)

Mazda_MX-5_Battery_Fuse_Support_v3.stl

STL

80.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

12g

Based on 25% main infill across listed model files

Material cost

$0.30

Filament only at roughly $24/kg PETG / ASA

Print time

21m–36m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mazda_MX-5_Battery_Fuse_Support_v3.stl	Primary model	80.2 KB STL	12g $0.28	12g $0.30	27g $0.66	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mazda Miata/MX-5 and Eunos Roadster Battery Fuse Support

0 downloads149 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This part allows you to mount a fuse like the one shown on the picture. The whole assembly can be joined to the battery bracket using two zip ties. The fuse is holded in place by two screws.