Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| MX5_Speaker_Adapter_Ring_6.5_inch.STL | Primary model | 191.2 KB STL | Slice file | Slice file | Slice file | Ensure a strong bond between the build plate and the print for a stable foundation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda MX5 Miata ND 6.5" Door speaker adapter bracket
Shared by
3DPrintedCarPartDescription
Adapter bracket for replacing the 6.5" door speakers in an ND generation Mazda MX5. Fits the factory door mounting holes and hardware, should be compatible with many aftermarket 6.5" speakers. I used JBL GTO620's as replacements. Speakers were mounted to the brackets using M4x20 hex cap machine screws and nuts, there are pockets in the bracket so the heads of the screws do not protrude and interfere with mounting. I also used foam between the bracket and door, and speaker and bracket, to minimize any coupled vibration. Printed with PLA, 30% infill. It is plenty rigid.
Compatible Cars
Originally published on thingiverse.com by Dave DeMona (doubled3001) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
