Files (1)

MX5_NB_8_inch_Speaker_Mount.STL

STL

464.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MX5_NB_8_inch_Speaker_Mount.STL	Mount / bracket	464.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

MX5 NB 8" Speaker Mount

0 downloads108 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Mounting bracket to install 8" speaker into the NB (mk2/ 2.5) MX-5. The bracket also has a little hood to divert any water that may get into the car to help protect your new speakers;) The mounting holes in the door already line up nicely with an 8" speaker but I found the hole in the door wasn't large enough for the speaker to sit flush. The mount just raises the speaker slightly to allow it to be installed properly. Also I had to sand down the speaker grill ribs in the door covers to get a nice fit.