Mazda RX8 rear license plate bolt clip - image

Files (1)

license_plate_clip.stl

STL

91.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
license_plate_clip.stl	Clip	91.1 KB STL	Slice file	Slice file	Slice file	Ensure the flat side of the clip faces inward during installation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Mazda RX8 rear license plate bolt clip

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Broken/seized rear license plate bolts? Don't want to remove your bumper to fix it properly? This is what you need. Can't say what year range will work but if the holes in your rear bumper are 15mm x 10mm this should work. Meant to take 6mm bolts around 12-15mm long. Flat side faces inward, which should be obvious if you look at the hole. Print with something durable and not melty (I used PETG) unless you like chasing your license plate down the interstate.